This machine is sold. Please call for similar models.
MACHINERY CONSULTANTS INC
1390 W. 200 S. Salt Lake City, UT 84104
Ph: 801-531-9500 Fx: 801-531-9555
We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration: Limited Use
Millport CNC/Manual Bed Milling Machine
w/ Centroid M400S CNC Controller
Model: Rhino III Serial No: 125140
General specifications are approximate and are subject to verification.
Table Working Surface: 12 ½” x 46” 4 tee-slots
(supports twice the load as knee mill)
Longitudinal Travel: 31.5”
Cross Travel: 17”
Head on Column 25 1/2”
Quill Travel: Manual op/power feed: 5”
This is a Fully Tilting Mill Head
Variable speeds Inverter Driven, from 0 to 4200 RPM
Taper in Spindle: #40 NST
Spindle Feeds: “Power Quill Feed”
3 changes, 0.0015”, 0.003”, 0.006” Per Rev.
Main motor: 7.5 HP
Electricals: 220V Single Phase
Approx. Weight: 4,000.00 Lbs.
Approx. Dimensions: 80” L x 70” W x 8’ 5”H
• Fully manual as CNC mill operations or fully manual mill with feeds & DRO X, Y, & Z Axes
• Power feed on table cross and head on column, X Y & Z axis CNC operations
• The Z axis for the CNC is the milling head on column, up and down with 25.5” travel
• Manually operated spindle quill with 5” travel, quill is independent & operated manually
• Centroid M400S CNC Controller s/n:20432 to include MPG for full axes movement
• 15 each #40 End Mill holders & misc. tool holders as well as roll-around Vertical Tool cart
• 52 Pc. Clamp Kit for 5/8” table slots
• Automatic oil lube system for all axes, Halogen Work light, Flood & Mist coolant system built in
Optional Items Available:
• (In Stock-new in the box) Centroid RT-150 Rotary Table: 6” tee-slotted, for an extra charge
• RT-150 needs 4th axis drive card to be purchased & installed for an additional charge by tech.
Condition: Great, low hour mill. Head sounds & runs great, Turcite lined Saddle Ways,
a very smooth runner, fully tested all items here under power, looks absolutely fantastic.
Inventory No: 9804